MSPA | COCOON | Verto Series | Textile-inspired Design | Rigid Hot Tub & Spa | Up to 6 Person

The MSPA Cocoon is a rigid hot tub and spa from MSpa's Verto Series, designed for up to 6 adults. It is built from 10 cm thick high-density EPE foam panels with a textile-inspired, rug-like exterior finish — providing superior heat retention, a cozy aesthetic, and a self-supporting structure that sets up in approximately 15 minutes with two people and no tools. The Cocoon includes UVC sanitization, a variable-speed air bubbling system, and full MSpa Link 2.0 app control. ETL approved. Warranty: 12 months on electrical parts and spa pool, 24 months on the frame.

Why This MSPA Cocoon Hot Tub

10 cm thick EPE foam panels — high-density foam acts as a robust thermal barrier; lab tests show water heats up to 2.6°C/hr, reducing daily energy consumption to as little as 3–6 kWh.
Textile-inspired exterior — rug-like texture wraps the spa in a warm, cozy aesthetic that evokes comfort and calm; distinct from the standard smooth-panel spa look.
Pre-slotted self-supporting structure — foam panels slot together without tools; the open-end panel fits into a precision sleeve requiring minimal alignment; two people, ~15 minutes to set up.
UVC sanitization — built-in UVC sanitizer eliminates more than 60 disease-causing microorganisms and pathogens using light alone — no chemicals required.
Energy efficient — dense foam construction retains heat longer, reducing how often the heater needs to run compared to standard inflatable or thin-wall spas.
MSpa Link 2.0 app control — manage heating, cleaning, and sanitizing schedules from your phone with intelligent auto-calculation.

Key Features

• Series — Verto Series; textile-inspired exterior design
• Capacity — up to 6 adults
• Insulation — 10 cm thick high-density EPE foam panels; heats at 2.6°C/hr
• Setup — pre-slotted self-supporting structure; no tools; ~15 min with 2 people
• Air bubbling — 138 air jets; variable speed (3 levels: 300W, 450W, 700W)
• Control — MSpa Link 2.0 app + OLED touch screen
• Sanitization — built-in UVC sanitizer
• Antibacterial liner — reduces 99% of bacterial reproduction (ISO 22196-2011)
• Smart filtration — app-based filter replacement reminders
• Certification — ETL approved

Specifications

What's Included

• MSPA Cocoon rigid hot tub (Verto Series)
• OLED touch screen control panel
• UVC sanitizer
• Filter cartridge
• MSpa Link 2.0 app compatibility

Installation & Care

• Setup: Pre-slotted EPE foam panels connect without tools. Two people and approximately 15 minutes are recommended. The open-end panel fits into a precision sleeve requiring minimal alignment.
• Placement: Requires a flat, level surface rated for the filled weight of 1,970 lbs. Suitable for indoor or outdoor use.
• Electrical: Requires a 110–120V / 60 Hz dedicated circuit. Use a certified electrician to verify circuit capacity before connecting.
• Water care: Clean the filter cartridge after each use; replace every 3–5 days. The MSpa Link 2.0 app sends weekly reminders during continuous operation.
• Energy tip: The EPE foam insulation retains heat effectively — keeping the spa at a set temperature between uses is often more energy-efficient than reheating from cold.
• Returns: 30-day return policy on unused items in original packaging. Contact info@zoppinh.com to initiate a return.

This product is not intended to diagnose, treat, cure, or prevent any disease or medical condition. Consult a qualified healthcare professional before use if you have any health concerns or pre-existing conditions. Results may vary.